Новости

Instructions for updating cards for garmin using the Map Updater program

1. Download the desired update using the MapCheker program.

2. Then you need to connect the car navigator Garmin or the memory card with the previous version of the computer and run the cleaned file. Further instructions will give the program.

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Cartography transfer from navigator memory to SD (MicroSD) Card

Some NUVI GPS navigators have a small amount of built-in memory. Updates may simply not fit into the memory of the device. You will need to download cards for NUVI on a clean SD or microSD card of a suitable volume. This is a simple procedure, but we still describe as much as possible that you need to make your car navigator to store cards on SD.

1. Buy in any computer store or mobile communications cabin clean SD or microSD format flash card. If you do not know which card is used in your GPS receiver, then just show the device to the seller. Recommended amount of memory card - 2 GB. You will have a memory reserve for further updates, and more cards can incorrectly perceive with some models of automotive navigators.

2. Put a clean flash card into the navigator and connect it to a USB cable computer. The computer will define the GPS receiver as two removable disks - the memory of the device itself and the SD (microSD) card. Through the "My Computer" or "Explorer", open the Garmin navigator memory (flash card is empty). Make a backup of the Garmin folder on the computer hard disk.

If you have a NUVI 1200 series navigator, NUVI 1300, NUVI 1410 and older - cartography is stored in a hidden folder .System. . You need to make a backup exactly this folder.

3. Open the flash card and create the Garmin folder on it. Folder Garmin Navigator Memory Cut the GPS Card file for NUVI gmapprom.img. And insert it into the Garmin Flash Card folder. Rename the transferred file in Gmapsupp.img. .

4. Now you need to check whether everything was done correctly. Disconnect the NUVI GPS Navigator from the computer and wait for it to download. The navigator should show you the card located on SD (MicroSD), that is, just display the map on the screen.

5. The GPS card is downloaded to SD (MicroSD), so just update the "USB flash drive" using the MAPUPDATER program according to the instructions at the beginning of the article.

If you have made a mistake somewhere, then everything can be restored by returning a backup of the Garmin folder into the navigator memory.

In case of difficulties, just contact the service center, for example - to our store.

Mapupdater instructions

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Instructions for updating cards for garmin using the Map Updater program

Actually it's all.

Your cartography is updated to the latest version.

Thank the author, share an article on social networks.

December 31, 2009

For drivers and travelers it is no secret that the roads in cities and countries often change. Without timely update of software cards, the navigator can make you in a dead end, because of what you lose time, resources and nerves. Owners of Garmin navigators to perform an update is offered in two ways, and both of them will look below.

We update the cards on the Garmin navigator

The download of new maps into the navigator's memory is a fairly simple procedure that should be performed more often than in half a year, and ideally every month. Consider that global cards have a sufficiently large size, so the download speed directly depends on the bandwidth of your Internet. In addition to this internal memory, the device may not always be enough. When going to the path, purchase an SD card where you can download the file with the terrain of any size.

  • To perform the process itself, it will be necessary:
  • Garmin navigator or memory card;
  • Computer with internet connection;

USB cable or card reader.

Method 1: Official Application

This is a completely safe and easy way to update cards. However, this is not a free procedure, and for providing fully workable, actual cards and the possibility of contacting technical support will have to pay.

I would like to note that there are 2 types of purchase: lifelong membership in Garmin and one-time fee. In the first case, you get regular free updates, and in the second you just acquire one update, and every subsequent need to buy in exactly the same way. Naturally, to update the map, it must be installed at first.

  1. Go to the official site of Garmin
  2. Go to the manufacturer's official website to establish a program through which further actions will occur. You can use the link above for this. Download the Garmin Express program. On the main page, choose the option "Download for windows" or "Download for Mac"
  3. The best place to explore and buy Garmin navigators. Only here you will find a complete range of Garmin, get the expert advice and a great post-sales service.

  4. , depending on the OS of your computer.
  5. Downloading Garmin Express

  6. Upon completion of the Distribution's download, you open it and install the application. First you need to accept custom agreements.
  7. Adoption of the Terms of User Agreement in the Garmin Express program

  8. Expect an end to the installation process.
  9. Getting Started Garmin Express

  10. Run the application. On the starting window we click .
  11. Complete installation of the Garmin Express program

  12. "Beginning of work" In a new application window, choose the option .
  13. Getting Started in Garmin Express Program

  14. "Add device"
  15. Adding a navigator in Garmin Express

  16. Connect the navigator or memory card to the PC. When you first connect the navigator, you will need to register it. After discovery GPS, click .
  17. Methods for connecting the navigator in Garmin Express

  18. "Add device"
  19. Detected Navigator in Garmin Express

  20. Checking updates will begin, wait for it. Together with the update of maps, you may be asked to go to the new version of the software. Recommended Press .
  21. Checking updates in the Garmin Express program

  22. "Install all"
  23. Installing Card and Software Update in Garmin Express

  24. Before installing the installation, see important rules.

    Express Upgrade Garmin.

    The first thing will be installed for the navigator.

  25. Прерванное обновление карт из-за нехватки места в программе Garmin Express

  26. Then the same happens with the card. However, if there is not enough space on the internal memory of the device, you will be prompted to connect a memory card.

    Подключение microSD в программе Garmin Express

    After connecting the installation will be proposed to resume.

  27. Возобновление обновления карт в программе Garmin Express

Wait for it.

Once Garmin Express notifies the absence of new files for installation, disconnect the GPS or SD drive. This is considered to be completed.

Method 2: Third Sources

Using informal resources, you can import custom and own street cards for free. It should be noted that this option does not guarantee per 100% security, proper functioning and relevance - everything is built for the most part on the enthusiasm and once the card you selected may be obsolete and stop being developed. In addition, technical support does not do such files, therefore it will be necessary to handle the creator, but it is hardly possible to wait for a response from it. One of the popular services is OpenStreetMap, in its example and consider the whole process.

Go to OpenStreetMap

  1. For a complete understanding, knowledge of English will be required, because All information on OpenStreetMap is presented on it.
  2. Скачивание карты с сайтаOpenStreetMap

  3. Open the link above and view the list of maps created by other people. Sorting here is carried out in the area, immediately read the description and frequency of the update.
  4. Select the option of interest and click the link specified in the second column. If there are several versions, download the last one. After saving, rename the file in Gmapsupp Expansion .img
  5. Do not change. Please note that most GPS Garmin may not be more than one files. Only some new models support the storage of several IMG.
  6. Connect the navigator to the PC via USB. If you have an Express application installed, which automatically started when the device is detected, close it.

  7. If there is an SD card, use it to download files by connecting the drive through the adapter in the card reader. Move the navigator to mode "USB Mass Storage" allowing you to share files with a computer. Depending on the model, this mode can be activated automatically. If this has not happened, open the GPS menu, select > "Settings" > Move the navigator to mode .
  8. Режим передачи данных USB Mass Storage в навигаторе Garmin

  9. "Interface" Across "My computer" Open the connected device and go to the folder "Download for windows" "Garmin" "MAP" "Garmin" . If there are no such folders (relevant for 1xxx models), create a folder
  10. Подключенный навигатор Garmin к компьютеру

  11. manually.
  12. Папка Garmin для дальнейшей загрузки карт

  13. Copy the file with the card to one of the two folders specified in the previous step.
  14. Upon completion of the copy, turn off the navigator or memory card. When GPS turns on, reconnect the card. To do this go to > allowing you to share files with a computer. Depending on the model, this mode can be activated automatically. If this has not happened, open the GPS menu, select > "Service" > "Map" "Additionally"

. Install a tick near the new card. If the old card remains active, remove the checkbox from it.

OSM has a separate dedicated server provided by the domestic Garmin distributor to storing cards with CIS countries. The principle of their installation is similar to what is described above.

Go to download OSM CIS cards

Using the readme.txt file, you will find the name of the archive with the desired country of the former USSR or the Russian Federal District, and then download and install it.

ЗакрытьIt is recommended to immediately charge the device battery and check the updated navigation in the case. Have a nice trip! ЗакрытьWe are glad that you could help you solve the problem.

Describe what you did not work.

Our specialists will try to answer as quickly as possible.

Will this article help you? WELL NO Sergey Vasilenkov from 16-11-2013, 01:55 5

Views: 769. Views: 769.Views: 769. Firmware navigator

Many can no longer imagine a highway without additional devices that "think" and focus in the terrain instead of the driver. However, acquiring the next miracle of computer art, you need to remember that simply, hanging the navigator on the windshield, uninterrupted and correct work from him can not be expected . New roads, streets, signs appear daily, and there is a risk of easy to get lost in any terrain. The timely update of the software of the device will easily develop unexplored expanses.

Software: How to update the Garmin navigator competently? In order for the GPS navigator to work correctly and performed its functions, a group of software solutions need. Such devices operate on the basis of stable OS Linux that significantly distinguishes them from all other Windows-based guidebooks. и Device firmware itself Downloadable modules

(Some functions, voice files, language, etc.) are two separate parts of the software.

Updating the firmware, it should be borne in mind that in some models it can lead to the loss of some languages.

  1. It is not recommended to update such Garmin navigators yourself:
  2. GPSMap
  3. GPS 72/76.
  4. NUVI 3XX and 6XX
  5. ZUMO 550.
  6. GPS 60.
  7. 276c.
  8. Summit.

Legend.

This is an incomplete list of models, on the update issues of which it is better to turn to professionals.

We do everything in order We do everything in orderWe do everything in order Navigation programs All navigation devices are completed with cards and a program installed. If licensed, then you can download a map from the manufacturer's website. As a rule, it is

Gisrx, Navitel, Igo Primo, Citigid, etc. So, How to update Garmin navigator? To begin, it is necessary to arm a PC, a cable for connecting to it to 30 mg of memory on the device. Check the container simply by clicking in the section "My computer" on the Garmin folder

.

. In the absence of space, you can mercilessly delete other files (language, help, etc.). The next step will be updated drivers. Usually there are no problems with it.

Installing a program to update For example, we use the program WebUpdater.

  1. . It can be quickly downloaded for any computer operating system. Next, follow these steps:
  2. Through the "Start" enter the "All Programs" section, we find WebUpdater and press "Next" in the window that appears. At this time, the program will determine the presence and connection of the new device.
  3. After pressing the "Next" button, the program will immediately issue information about the presence of the navigator, and will also offer data on the introduced innovations. If the firmware of the device is new and does not require updates, you should take the next step.
  4. Loading modules (language, help, sound, etc.). The necessary functions are marked by checkboxes, click "Next"
  5. After a good loading, the "Finish" button appears - click
Disable the device from the PC, then turn it on and wait for the complete unpacking of the modules Disable the device from the PC, then turn it on and wait for the complete unpacking of the modulesDisable the device from the PC, then turn it on and wait for the complete unpacking of the modules

Updating navigation device

Update device without pairing with PC

It often raises the question of how to update the Garmin navigator if the device does not connect to the computer. After loading the drivers, it suffices to follow the instructions of the program. After the navigator is turned on (Turn ON Your Garmin GPS), you must enable and connect the device to the PC. Installation software will automatically. To complete - click "Done".

  • Possible problems when updating Turning off the device during firmware
  • . Perhaps the battery sat. To this not happen, you should fully charge the device before installing updates. Message "System Software Missing"
  • . The reason may be the incorrect operation of the antivirus, which has forbade the launch of individual files. You must contact the warranty center. Message "Loading Maps" after multiple navigator reboot cycles

. The problem may happen due to improper firmware and installing unlicensed cards. You should contact the service centers to obtain restoring files.

Following this guide, you can easily update the navigator of many models, conquer a new area and always keep the car course

How to update Garmin.

Update Navigator, Clock and Registrar Garmin

Garmin Express.

To update, synchronize and transmit data and a lot more for what exists Garmin Express program

This program is installed on the computer and allows simple setting, registration and management of GARMIN devices.

The program is very simple and convenient has step-by-step instructions allowing you to easily update your devices.

  • Opportunities:
  • Card updates (for automotive navigators)
  • Software updates for all Garmin devices
  • Synchronization of data for sports hours, fitness bracelets

Loading supplements - languages, topics and other "decorations"

Garmin WebUpdater.

The program is very simple and convenient has step-by-step instructions allowing you to easily update your devices.

  • To update the Garmin software (firmware), you can use the application for the Garmin computer - WebUpdater. A simple program with a step-by-step intuitive interface.
  • Software updates for tourist navigators Garmin
  • Synchronization of data for sports hours, fitness bracelets

Updates Software for automotive and motorcycle navigators Garmin  

!!! After the update, the loss of Russian language is possible on the devices taken from supporting the devices not for the Russian market. If you doubt, check in our site chat or contact our Garmin store.

Garmin MapChecker

The program is very simple and convenient has step-by-step instructions allowing you to easily update your devices.

  • To update the map "Road of Russia. Russian Federation. Topo.", Which tourist navigators, Fenix ​​clock or SD card, you need to use the MapChecker program (version for Windows). Exact program with step-by-step interface. This is a simple bootloader of the card archive to your computer. Just just follow the instructions on the screen.

Updates of the road map of Russia Topo Update Navigator, Clock and Registrar Garmin Maps on the automotive navigator are updated using the program

Update Navigator, Clock and Registrar Garmin

. Visit Garmin.com/express and download this program to your computer. Then install the program, connect the navigator to the computer and add the device to the program. After these actions, the Garmin Express program will offer updating firmware and cartography, if any.

To update the map "Road of Russia. RF. Topo.", Which is installed in tourist navigators, Fenix ​​clocks or downloaded to the SD card, you must use the MapChecker program (version for Windows).

Video. Hi everyone! I recently showed how to glue the Garmina cards, so that you have almost the whole world in the navigator or only the necessary parts and how to put the harmine cards on the USB flash drive if they are very large. And today we will see How can I update the firmware in harm After all, the newer firmware the more improvements and stability appear. AND How to update maps

After all, every year everything changes, and when you are in an unfamiliar area, it is very necessary!

In principle, this is the last article about the harmines, because I have already described everything you need to maintain the normal operation of the navigator.

It remains only the most important thing.

How to update free built-in cards?

To update the cards download the Map Checker program.

обновление карт garmin

We start the program to press further, then select the navigator or a flash drive, where the cards are found. The program will find a version and prompt the link to download.

Click, the page will open in the browser, select a link again and you will have downloading new cards. Next, run the downloaded file, press further all the time, then the map file will be unpacked on the computer, the program in which is back to and you want to select your device. Next and the program will update the cards that's all.

How to flash Garmin navigator?

To do this, you will need a WebUpdater program, you can download it from the official site of Garmin. Or use the download page.

Before the update, it is desirable to charge the navigator completely!

Install and run.

When you start, select Next, and then select your device. After that, the program will check updates to your device. If you found a new firmware, then you download and install (the program will do everything for you).

Проверка прошивки garmin

I have already installed the last firmware, this update is not required.

Проверка обновлений garmin

When you install the firmware, the program will also set new components.

Select the necessary and update by clicking below. The program will again do everything for you.

And you can also update the navigator and using the Garmin Express program.

express обновление garmin

She seemed to me more weighty and less understandable.

At the top choose a category, and at the bottom of the update. Here, by the way, you can update cards. But I would not advise, because she immediately does everything, and shakes and installs.

In this way, you can update the Garmin cards and update the firmware on the navigator.

P.S: There may also be such a situation that when turned on, the language and license agreement will be allowed. To do this, we include, we find satellites and wait for about 30 minutes. Just in case, fully charge the device. Turn off. Then again we turn on the satellites, it takes 30 minutes. Turn off and the window should not be closed.

Helped? Thank the author

Helped? Thank the author

December 31, 2009

For drivers and travelers it is no secret that the roads in cities and countries often change. Without timely update of software cards, the navigator can make you in a dead end, because of what you lose time, resources and nerves. Owners of Garmin navigators to perform an update is offered in two ways, and both of them will look below.

We update the cards on the Garmin navigator

The download of new maps into the navigator's memory is a fairly simple procedure that should be performed more often than in half a year, and ideally every month. Consider that global cards have a sufficiently large size, so the download speed directly depends on the bandwidth of your Internet. In addition to this internal memory, the device may not always be enough. When going to the path, purchase an SD card where you can download the file with the terrain of any size.

  • To perform the process itself, it will be necessary:
  • Garmin navigator or memory card;
  • Computer with internet connection;

USB cable or card reader.

Method 1: Official Application

Card updates on Garmin navigator

  1. Go to the official site of Garmin
  2. Go to the manufacturer's official website to establish a program through which further actions will occur. You can use the link above for this. Download the Garmin Express program. On the main page, choose the option "Download for windows" or "Download for Mac"

I would like to note that there are 2 types of purchase: lifelong membership in Garmin and one-time fee. In the first case, you get regular free updates, and in the second you just acquire one update, and every subsequent need to buy in exactly the same way. Naturally, to update the map, it must be installed at first.

Upon completion of the Distribution's download, you open it and install the application. First you need to accept custom agreements.

Expect an end to the installation process. In a new application window, choose the option .

In a new application window, choose the option

Connect the navigator or memory card to the PC. When you first connect the navigator, you will need to register it. After discovery GPS, click .

When you first connect the navigator, you will need to register it. After discovery GPS, click

Checking updates will begin, wait for it. Together with the update of maps, you may be asked to go to the new version of the software. Recommended Press .

Together with the update of maps, you may be asked to go to the new version of the software. Recommended Press

Before installing the installation, see important rules.

The first thing will be installed for the navigator.

Then the same happens with the card. However, if there is not enough space on the internal memory of the device, you will be prompted to connect a memory card.

After connecting the installation will be proposed to resume.

Wait for it.

Once Garmin Express notifies the absence of new files for installation, disconnect the GPS or SD drive. This is considered to be completed.

Method 2: Third Sources

Go to OpenStreetMap

  1. For a complete understanding, knowledge of English will be required, because All information on OpenStreetMap is presented on it.

  • Open the link above and view the list of maps created by other people. Sorting here is carried out in the area, immediately read the description and frequency of the update.
  • Select the option of interest and click the link specified in the second column. If there are several versions, download the last one. After saving, rename the file in Gmapsupp Expansion .img
  • Do not change. Please note that most GPS Garmin may not be more than one files. Only some new models support the storage of several IMG.

    Wait for it.

    If there is an SD card, use it to download files by connecting the drive through the adapter in the card reader. Across "My computer" Open the connected device and go to the folder "Download for windows" "Garmin" "MAP" "Garmin" Across

    manually.

  • Copy the file with the card to one of the two folders specified in the previous step.
  • Upon completion of the copy, turn off the navigator or memory card. When GPS turns on, reconnect the card. To do this go to >allowing you to share files with a computer. Depending on the model, this mode can be activated automatically. If this has not happened, open the GPS menu, select >"Service" >"Map" "Additionally"
  • . Install a tick near the new card. If the old card remains active, remove the checkbox from it.

    Copy the file with the card to one of the two folders specified in the previous step.

    Using the readme.txt file, you will find the name of the archive with the desired country of the former USSR or the Russian Federal District, and then download and install it.

    Using the readme.txt file, you will find the name of the archive with the desired country of the former USSR or the Russian Federal District, and then download and install it.

    Thank the author, share an article on social networks.

    How to update cards on Garmin navigator

    How to update the cards on the Garmin navigator - the question is common, because more and more people use the devices of this particular brand. The map of Russia, as well as other countries, is often changing, as new buildings are built, the oldations are redeemed, the names of the streets are changing, and people are always required. As it turned out, not everyone can independently understand the upgrade of its own device.

    Methods for downloading new data Installing cards to the Garmin navigator is carried out only when connected to a computer

    . By air it is impossible to update. Download Maps for Navigator Garmina for free only from informal Internet resources. From the official site, it is possible to get new information only for a certain amount.

    Loading through the official source By performing an update in this way, you can download new materials and update the firmware. Before starting the installation, it is necessary to fully charge the device, then connect it USB cord

    1. Committed to the computer. We go to the official website of Garmin and looking for the region to be updated. A detailed map of Europe, for example, will cost almost 12 thousand rubles
    2. . It includes a huge number of objects, streets and roads. Create an account and acquire the necessary updates. Go to the section " My cards "And go to the item" Recently acquired maps
    3. ", After which we find your navigator in the list of available devices. To start loading materials, download the Garmin Communicator program. It is worth installing the Garmin Express utility. It is also necessary for a successful update. Completes the installation of registration. Run the program and select the " Update "And, clicking on" Details

    ", We note the update required for the navigator. After a short period of time, all data is loaded, and it will be possible to disconnect the device from the computer. After rebooting the device, new data will take effect.

    A plus of such a way is easy data loading in the future. After a while, after connecting the device to a computer, Garmin Express will automatically check the availability of updates and offer them to install them.

    Loading through unofficial sources

    1. If the user has no extra money or simply do not want to spend, then the cards for the Navigator Garmina can be installed and for free, however, there is always a risk to stumble upon infectious or low-quality files. To obtain data, it is best to use sites with open materials available to all. We find updates for the required region, after which .
    2. load them on your computer Connect the navigator to PC
    3. . Immediately can open Garmin Express. It is worth closing, since the program prevents the download of new data. Also in the device settings you need to select the gadget to work in the drive mode.

    At the root looking for the MAP folder. If it is absent, then we create it yourself. All previously downloaded files are transferred here. After that, you can disconnect the device from the computer. To end the installation reboot the gadget and enjoy updated information about the region.

    This method is inconvenient in that every time you have to look for all materials yourself. Not always actual information appears simultaneously with official sources, therefore, freebies are sometimes waiting for the week, or even months to obtain new data.

    How to update the cards on the tourist navigator Garmin Topo 6.xx

    GPS-VOLOGDA.RU → Card update information for Garmin → How to update cards on the tourist navigator Garmin Topo 6.xx

    To send a response, you must login or register

    Posts 3.

    • 1 Theme from GPS-Vologda 2014-05-24 13:14:05
    • GPS-Vologda.
    • Administrator.
    • Inactive Registered:
    • 2014-05-03 Messages:

    26.

    Topic: How to update the cards on the tourist navigator Garmin Topo 6.xx How to update cards on the tourist navigator Garmin with cards

    "RUSSIA RUSSIA. RF. Topo 6.xx "

    This information is reference. All actions with the navigator, with cards, memory cards and PCs you do under your responsibility, "at your own fear and risk."

    To update the cards of the roads of Russia. RF. Topo 6.xx "in the tourist navigators Garmin we will need:

    1. Navigator2. Cable connecting "Navigator" - "Computer" (usually this is USB - MiniUSB) 3. Stationary computer or laptop,

    Important: System Requirements: Windows 2000 / XP and above, CPU 1 GHz and above, RAM 512 MB and above, 8 GB of free space on HDD.

    4. Internet access (than "faster Internet", the faster the update download process will be completed. Usually from 30 minutes to several hours) 5. Download and install the MapChecker program from the official site. Link:

    Depending on the generation (old) and navigator models: In GPSMAP 62 / 62S devices, Oregon 450, Dakota 20, GPSMAP 78S, GPSMAP 78, Oregon 650T, Monterra, or other devices, (with an additional card acquired), maps are on the MicroSDHC memory card.

    Important: At the moment, the instruments sold from 2 GB and 4GB memory cards or an additional memory card with a volume of 2 GB and 4GB is possible to replace the license (transferring the card to the larger memory card). To do this, follow the link, enter the instrument ID and email address, then, for some time, your email address will come a letter with detailed instructions for replacing the license and update to version 6.19, after which it will be possible to update to the last relevant to this Moment version - 6.22 according to the instructions below Or buy a new top card with

    50% discount For Etrex 20.30 you will need a microSDHC memory card with a volume of at least 8GB.

    It is recommended to use the "branded" memory cards, for example SanDisk, Transcend, Kingston with a volume of 8-16 GB, no longer required.

    GPSMap62Stc, GPSMAP 64ST, Montana650T, Montana680T, Oregon650T, new cards are placed in the internal memory of the instrument.

    -Connect the navigator to the computer (if the navigator connects the first time, then the driver installation will be installed) - Run MapChecker. The application will check your card and if you have an update, you will tell you how it can be downloaded to Having a link. After completing the verification, go to the address specified by the program and download the update. Little trick:

    To speed up card updates on Garmin etrex 20, 30, oregon 600, GPSMAP64, MONTANA 600), you can transfer the card from the device's memory to the MicroSDHC 8GB memory card.

    Instructions for transferring a map file to Microsdhc 8GB (not relevant for instruments whose cards are tied to 2GB card: Dakota 20, GPSMAP 62 / 62S / 62Stc / 78S, Oregon 450- For these devices, a license is replaced, which can be made initially Larger 8-16GB card): 1. Buy MicroSDHC 8-16GB flash drive. Minimum memory card size 8-16GB 2. Insert the MicroSD flashlight into the memory card reader (the card reader) or in the absence of it to the navigator (the transfer process will significantly delay) .3. Connect your navigator and / or memory card reader to a PC via USB cable. PC must define the device and SD flash drive as removable discs. Using the My Computer or Explorer tab, open the Garmin folder on the navigator disk (flash drive disk while empty). Preferably recommend that you make a backup copy of this folder and save it to a PC. The size of the folder is about 2 GB.4. On the SD flash drive disk, create a Garmin.5 folder. From the Garmin folder on the navigator, move ( Cut ,(Select file (by clicking on it left mouse button) Then the right button - cut or "hotkeys" - Ctrl + x)) the file of the card gmapprom.img and insert (the right button - insert or "hotkeys" - Ctrl + V) in the Garmin folder on the SD flash drive .6. After copying the file in the Garmin folder on the MicroSDHC flash drive Rename Card file gmapprom.img in gmapsupp.img

    Now the map file is on your MicroSDHC flash drive, and includes the previous version of the card you want to update.

    Turn off the navigator and / or memory card reader (card reader) from the PC, insert the memory card to the navigator, turn on and wait for the card download. If you did everything correctly, the tania navigator displays the map of the previous version located on the MicroSDHC flash drive.

    Then pull the memory card from the instrument, insert it into the read-write device (the card reader), then you run the MapChecker program. The application will check your card and if you have an update, you will tell you how it can be downloaded.

    After the verification is complete, go to the address specified by the program, and download the update (xxxx) version 6.xx (XXXX). You can start updating the card to the current version according to the MapChecker instruction.

    When updating, specify the disk (disk letter) MicroSDHC - flash drives.

    In case of problems, it is enough to restore the Garmin folder on the navigator from the backup.

    If you are experiencing difficulties in conducting such operations, then you will be reducing to the nearest authorized service center Garmin.

    Note: Flashcart with a map of Russia. RFTPO 6.HX "" "After the update, it will work at the device in which the version map of 6.xx was installed, because Inside the device is the activation code (UNLOCK code) to this card, unique for each instrument.

    The process of transferring cards to the microSDHC memory card will save your time when copying cards (about 2 hours), and simplifies the further update of maps in the future.

    Important Move the map tied to the SD Flash card acquired separately from the navigator to another SD Flash larger map is not, since the unlock code is tied to the old SD Flash card.

    It is possible to buy a new discount card 50% If your card is tied to Labor You can transfer it to the SD Flash larger, as indicated above in the paragraph "Instructions for transferring a map file to MicroSDHC 8GB"

    and update. In this case, the memory card will be constantly in the slot.

    Installation instructions with Mapupdater with Garmin.ru:

    Description

    In release 6.22, the map is divided into two parts: East and West. At the same time, you can install only one part into the device. The cartographic cover of each of the parts includes part of the other regions, the cards are made with overlapping. To install the desired part, select the appropriate update program. For refreshments of the map "Road of Russia. RF. Topo. " Version 6.09-6.21 installed on the Montana, Oregon, Etrex 20/30 series devices or on the SD card, you need to download the distribution of the latest version of the Mapupdater application above and run the installation program. The image of the program takes a large amount, so it is recommended to use a specialized download program (Download Manager), such as GetRight® or Leechget or Download Master. Update the possibly maps in the memory of the device (previously downloaded), as well as cards that are supplied on SD cards complete with the device. For updates, free space is required in the instrument's memory. It is recommended to save user data before the update process through the MapSource program. Preparation Before installing - save user data by copying the contents of the device disk to a computer into a separate folder. - Save the points using the MapSource program. - Ensure that in the device or on the card there is enough free space .- Free place if required.

    Advice

    - You can free up the place by deleting unused user files, photos. - Data transfer can work incorrectly if a USB hub is used. Use the usual USB port to connect. - It is recommended to close all other running programs. Antivirus programs can also affect data exchange. To the attention of users of the Etrex 20 and Etrex series devices 30 updated file of the road "Roads of Russia. RF. Topo "has a size of 4700 MB and does not fit into internal memory. To use the new card, you must transfer the map file to an additional clean SD flashcard having an enlarged volume.

    Instructions for transferring a card file to a flash drive to increase the amount of memory:

    How to update maps on Garmin navigator? Article author:

    Bogdan Denisov

    Journalist, administrator of online sites "Medical facts", the author of many articles on savings for the site "Economy".

    He graduated from the Faculty of Journalism of the Kiev National University. T. Shevchenko (KNU) in 2013.

    15.10.2018 4 comments 39,948 views

    In order for the information to Garmin Nouvi to be relevant, his owner should know how to update the cards on the Garmin navigator. To do this, you can use in two ways: buy licensed maps or free download them from informal sources.

    Official versions

    • Licensed data update provides two options:
    • one-time download of the latest versions of the cards;

    Lifetime in the club Garmin.

    The second method will make all new updates available during the service life of the navigator.

    Purchase is carried out on the Garmin website or in any official company store. With an online purchase, you can pay the acquisition as by bank transfer (using a bank card or through the electronic payment system of the coina.ru) and cash to the courier when delivering the order.

    Important! Before buying, you need to enter MyGarmin's personal account. If there is no account, you must first create it.

    How to download the official version of the updated data?

    1. First of all, you need to connect nuvi to the computer and wait for it to fully download. Further actions look like this:
    2. If the Garmin Express application has not yet been installed on the PC (thanks to which it can interact with Garmin Nuvi), it will be necessary to install it. You can download the program to Software.garmin.com/ru-ru/express.html.
    3. Register your navigation device in the application.
    4. In the Application, go to the "Update" menu, where available card updates will be seen (including just purchased).
    5. Near this tab, click "Show details" and then "install". Before installing the system will ask for a custom agreement.

    Wait for the download.

    The updated data is loaded first into the application, after which they will be sent to the device. The process is short and takes about 5 minutes. You can then close the application, disable nouti from the computer. Navigator will restart, and updated cards will be available on it.

    Installing informal update

    Before adding a map to the navigator, make sure that its format is suitable for the device navigation program. In addition, this program must support updating its data.

    Data can be downloaded from various sources. The most popular is the OpenStreetMap resource. Cards from it can be completely free to import into your devices. First you need to download them on the PC, changing the name of the downloaded file on GMapsupp.img (if its name is different).

    Important! Only some devices can store more than one GMapsupp.img file. In most cases, the Garmin navigator can use only one such file.

    1. After downloading, you can start setting:
    2. Connect the device to the computer. If the navigator has an SD card, it should be inserted into the Card-reader PC.
    3. Translate the navigator to USB Mass Storage mode, which will allow you to transfer data from NUVI and on it ("Interface" - "Settings" - "USB Mass Storage").
    4. Open Garmin Nuvi on a computer (orSD card from it), then go to the Garmin or Map folder and transfer the GMapsupp.img file there.

    After copying has been completed, you can disable nouti from the computer.

    In most 1xxx models (Garmin NUVI 1300, NUVI 1410 and other) there is no MAP and Garmin folder. In this case, you need to open a device on a PC (for example, Garmin Nuvi 1410) and create a folder in it, and then transfer the file to it.

    1. After disconnecting from the computer, the GPS device must restart, and the updated card will become available. In order to be used precisely, it is required to disable the previous map:
    2. In the "Service" menu, click "Settings".
    3. Select "Map", then "additionally".

    Remove the box with a basic card and put it around a new one.

    Now the default NUVI will use the updated data.

    What is the better way?

    Each owner of the navigator has the right to choose which way it will update the data on its device. Unlicensed maps can be downloaded for free, however, there will be no technical support and update. In addition, in such cases there is never 100% confidence in their safety and performance.

    For licensed maps, Garmin Nouvi will have to pay, but they are completely safe and function well, and in the event of any problems you can seek help from representatives of the company.

    Update firmware

    The navigator firmware can be updated using the Garmin Express program. Go to the Garmin.com/express website and download the file with the installation. Install the program in your system and run it. Connect your navigator to a computer via wire or ant + connections. After add the device to the program. Service and support

    We guarantee excellent service not only during the purchase of the device, but also full-fledged post-sales support - free software updates, detailed advice and training seminars.

    Additional warranty

    Garmin's branded shops give an additional year warranty to everyone who acquired Garmin navigators only in our stores, subject to registration in the accumulative program

    .

    Garmin Bonus Branded shops


    Добавить комментарий