Анонсы

How to watch the motherboard on windows 7 - find out from our article

The question is the name of the motherboard of the laptop or computer, often arises before users. This may be required after reinstalling the operating system if the disk with the original drivers is lost or damaged. Also, if a PC upgrade is planned, you need to know exactly what processor and memory supports your motherboard. To get a specifications with technical characteristics, you also need information about the name of the board.

There are several ways to determine what kind of "motherboard" is installed in the PC.

How to watch the motherboard on windows 7

How to watch the motherboard on windows 7

Visual inspection

This method is characterized by simplicity and reliability. To find out the marking of the board, you will need to access the PC inside. When carrying out this operation, the computer must be turned off. It should be removed the lid and carefully inspect the board. Often there are several stickers and stickers with various data - serial number, part number, name. You need to find a nameplate with a model model. Often the name is applied directly to the texture of the board.

On a note! Convenient method - take a picture of the smartphone all stickers and inscriptions and then calmly consider them on the phone screen.

To find out the marking of the board will need to access the PC

To find out the marking of the board will need to access the PC

But sometimes all the inscriptions are already so lost, and the information on the stickers is almost unrealistic. Another case - the computer is under warranty and feared. An autopsy will lead to a loss of a warranty on the product. Then you have to use other ways to determine the board model.

Information B. Bios.

Such important information as a computer system board model can be obtained via BIOS. If the computer outsiended board name is often displayed on the display at the primary stage of verification. In the case of modern boards, this process passes very quickly, it happens very difficult to notice something. However, going to the BIOS settings, you can detect this data. It is not always easy to find them. Usually there is such information in the System Informatiom section. However, depending on the BIOS version, it may be another tab.

Video - how to find out the model of your computer motherboard

Use of operating system tools

To find out the name of the components, optionally disassemble the computer. In the means of the operating system itself there are special tools that will help get such information. To do this, you will have to use the console. Run it is most convenient by pressing Win + R. After, in the window that opens, you should enter CMD, press input.

The console will open. In it, it is possible to perform basic commands in it.

WMIC. Baseboard. Get. Manufacturer. Its execution issues information about the manufacturer of the board.

Entering and performing a combination WMIC. Baseboard. Get. Product - You can get as a result of the board model.

Performing a combination of WMIC Baseboard Get Product

Performing a combination of WMIC Baseboard Get Product

Another method that can also be used in WiMDows 7 is available. Installed equipment is available in the System Information section. You can access it, for example, by entering the command MSINFO32. Make it you need also through the console. Points "Model" and "Manufacturer" will indicate the desired characteristics of the board being used.

Online check

Sometimes it may be useful for the possibility of online service from Intel, which can be used to check the equipment. A significant part of modern boards is made on Intel chipsets.

You can find out the motherboard model online

You can find out the motherboard model online

The official website provides the ability to use the "Identification" function and hardware that is used on the computer. By clicking on the appropriate link, the server scans the PC and give data on the name of the board and its manufacturer.

Special programs

More detailed information can be obtained when using special utilities that serve to diagnose and collect full information about the system. There are quite a lot of such programs. Among them can be noted:

  • Speccy;
  • CPU-Z;
  • AIDA64;
  • PC Wizard;
  • Everest.
Speccy program

Speccy program

It should be noted that the AIDA64 is the further development of the popular Everest utility, known to many users with experience. Now she is called AIDA64. However, there are still functional versions of the program under the old name Everest.

Using CPU-Z.

Despite the fact that the main task is programs - getting full information about the processor, it can often help and other cases.

Using the CPU-Z program to determine the motherboard model

Using the CPU-Z program to determine the motherboard model

Working with this program usually does not cause any difficulties. If it is not yet installed on the PC, you must first download it from the official website of the program developer. The program is completely free. Then, after starting the utility, you just need to go to the Mainboard menu. Here will show data on the name of the motherboard and the manufacturer. In addition, here you can learn more detailed information - the version of the chipset, the name and version of the BIOS.

Using Aida64.

This program also enjoys the great popularity of users. This utility is paid, however, the first 30 days after installation is a free trial period. Available on the developer's website. After installation, you can start using AIDA64.

Definition of the AIDA64 program to determine the model of the motherboard

Definition of the AIDA64 program to determine the model of the motherboard

Running the program you want to go to the "Computer" item. Here you need to select the "Total Information" icon.

Here in a visual and informative form will be provided information about the installed computer components. In particular, data on the name of the model, the version of the chipseet is available for the motherboard. On the left clik of the mouse opens a menu that contains links to the manufacturer's site.

You learned about the main methods that can be used to determine the model of motherboards. Possessing this information, you can independently solve how it is convenient for you to use.

Did you like the article? Save not to lose!

The user has the question of how to find out the model (revision) of the computer's motherboard with Windows 7, arises along a variety of reasonable reasons. Most often, this information is required to correctly update equipment software, troubleshooting, use additional devices, etc. Motherboard

The easiest method

First, it is recommended to use the visual way and simply read the model name on the equipment packaging.

Name of the model on the packageIf for any reason the owner's owner is missing, then often the necessary information is specified by the manufacturer in the documentation for the computer.

However, unfortunately, often the owners of the PC cannot find the accompanying instructions for their devices or just laziness to get up from the sofa and dig in pieces. In this case, the solutions of the problem will help the program's step-by-step guides.

Using the built-in tools "WINDOVS 7"

You must perform only a few consecutive actions:

  1. Through the "Start" in the "Run" menu print "MSINFO32"; Print "Msinfo32"
  2. Click OK;
  3. Then, in the displayed window, enter the section "System Information" section; Section "System Information"
  4. Ready! In the column "Model" will be available for the desired information.

Using console

In order to solve the question raised quickly and effectively, "Almighty" command line will help.

Next steps are required:

  1. Click "Start";
  2. Log in to the window to perform and print "CMD"; Print "CMD"
  3. Click OK;
  4. In the displayed console, print "WMIC Baseboard Get Manufacturer";
  5. Click "Enter", the name of the motherboard will appear;
  6. Then print "WMIC Baseboard Get Product";
  7. To click "input", the model of the motherboard will appear.

Motherboard model

Through a special utility "Speccy"

For beginners and for users who have had difficulty, the above methods have been developed by special applications that define models of system boards. Below is an example of using one of the most convenient utilities.

It will be necessary to execute the following steps of actions:

  1. Download from the official resource app and install in PC (it is free);
  2. Run the program and enter the tab "System Board"; Tab "System fee"
  3. Ready. The relevant item will display the search for information.

Aida.

It has advanced functionality compared to the above utility, but not free. If only the one-time application of the program is planned, you can use a demo version for free, which is also available on the official website of the application creator.

The algorithm of actions is similar to the previous utility and all of interest are located in the "System Board" tab. Aida.

Visual method

In the case when none of all of the above methods helped, the most reliable option to accurately figure out the answer to the assigned question will be a visual inspection of the board itself. This requires only to open the PC system block case and look inside.

On the "motherboard" is always indicated by its model.

Model designation10 - - model on motherboardThis method allows to unmistakably determine the model of component equipment, but it is easy to perform only if there is a stationary PC. If you want to find out the model of the netbook or laptop system board, then the process is characterized by significant difficulty when disassembling and subsequent assembly of the device.

The motherboard combines all computer components. To solve a number of problems with sound, video, a network in a PC need to know exactly its model to download the correct drivers. If you want to change the processor or add RAM, you also need the name of the motherboard. There are several options, how to find out which motherboard on the computer is built-in utilities in Windows, third-party applications or visual inspection.

Computer motherboard

Internal means

If there is Windows 7, 8 or 10 on the PC, the fastest option, how to learn your motherboard on your computer - use built-in utilities. To view information:

  • Close Win + R;
  • Enter MSInfo32. ;
  • In the list of information, find the items "Manufacturer" and "Model" - this is the data of the motherboard.

Utility "system information"

If the fields indicate "not available", the Windows utility could not determine the information. Trying to use another tool for diagnosing the DIRECTX functions:

  • Press Win + R;
  • Enter dxdiag ;
  • In the line "Computer Model" you will see which motherboard stands on the PC.

In command line

How to find out which motherboard is standing on a home computer: Clamp Win + R and enter cmd. . The black window will appear, it is necessary to enter one of the lines:

  • WMic Baseboard List Full - full characteristics of motherboard;
  • WMIC Baseboard Get Manufacturer - displays data on the company's company;
  • WMic Baseboard Get Product - Model Name.

Data from the command line

It is enough to check the commands defined in the CMD, and you can identify the available device.

In bios.

The BIOS will help to get the necessary information in which you can get during the computer boot. How to find out the name of the available motherboard:

  • When you start a PC, press DEL or F2 several times until the BIOS starts;
  • If you do not turn out - at the start of the system, look at what kind of key it is necessary to click to enter the BIOS;
  • You will see the name of the board in the top line of the main window or on the Advanced tab.

Third-party programs

If domestic funds on Windows did not help learn their motherboard or you need more detailed information, install one of the diagnostic tools on the PC.

Aida64.

The AIDA64 application knows how to find out the model of the motherboard inserted on the computer. It is paid, but the trial period of 30 days will allow you to see all the necessary information for free. Download the trial version and set, after starting, open the tab "System Board" tab - you will see the data on the manufacturer and model immediately.

Information in AIDA64.

CPU-Z.

A small CPU-Z program will help you quickly find out what kind of motherboard is in PC. The utility is distributed free of charge, the interface in English. Look for the necessary information on the Mainboard page, in the "Manufacturer" fields, the manufacturer of the board, "Model" - its model.

Speccy.

Speccy application will display all information about the characteristics of the computer on Windows 10, 7 and even XP. From the developer resource you can download the free version for installation or portable option from the Building page by reference below. After starting, the main motherboard information can be found in the "System Board" paragraph among general information. Detailed data on its temperature, chipset, locate in the subsection of the same name by selecting it on the left.

Data in Speccy.

Visually

If the computer does not start or you need to determine the model of the board not inserted into the housing, determine it visually. It will not be necessary to disassemble the PC, it is enough to open the system unit and consider the motherboard. If you do not know how it looks like - look for the largest fee in which others are inserted (processor with cooler, video card, memory bar). Find a major marking - most often it is placed near the processor or PCI-E slots.

Marking of the manufacturer on the board

If a specific model on the board is not specified - rewrite the entire marking found and drive in the search engine. Usually, even by fragmentary information, you can set the exact name of the device. Disassemble the laptop more difficult - in this case, it is better to find all the characteristics of the board on the laptop model on the Internet.

Conclusion

We figured out how to determine the manufacturer and model of the motherboard. It is easier to do this through standard Windows information if there are no data - install one of the third-party applications in which other device characteristics at the same time. But sometimes you can get information faster with visual inspection by reading the labeling on the board itself.

When searching for manually drivers and subsequent installation, users are asked: how to find out which motherboard is on a computer or laptop.

In this matter we will understand and consider all sorts of ways in all details. In which include:

  • Normal inspection of the appearance of the laptop housing;
  • study of the available documentation;
  • Search for information on the name of the laptop model on the Internet;
  • Using the options of the Windows operating system.

Learn the name of the motherboard will be easy enough, so you can choose the way you are interested in immediately, and not read everything from A to Ya.

How to find out the motherboard model using Windows

If you have a regular landline computer, I would have to know the name of the system board by studying the board itself inside the case. For some, it is rather problematic, because not everyone wants to fit into the system unit.

In this case, it is easier to use the tools embedded in Windows.

We recognize the model of the motherboard via the command line

A rather simple way, although it is even easier. Works on any version of Windows. To run the command line in Windows 10, it suffices to press the Win + X key combination and click on the menu on the desired item. You can use the PowerShell utility.

In Windows 7, we find the command line in the Start menu or click the key combination Win + R. And we prescribe a command Cmd. . Next, follow the instructions:

  1. Initially, the black command line window opens.
  2. We prescribe a command in it WMic Baseboard Get Product And press the ENTER key.
  3. The number or name of the motherboard will be displayed.

How to find out the motherboard model using Windows

Sometimes, disabled through this command of information is not enough, since only some kind of incomprehensible product number can be shown. So it turned out. To reflect the full picture you need to use a slightly different command:

WMic Baseboard Get Manufacturer 

How to find out the system board model via the command line

If for some reason the information still turned out to be not enough or the method did not work. Let's try to find out the name of the system board by another method.

How to find out the motherboard model through system information

This method is very simple. In any version of Windows, there is a MSINFO32 utility, the name of which "system information". Here is how to open this tool.

  1. Run the "Run" window using the Win + R keys.
  2. Enter the command MSInfo32. .
  3. On the right we find items "manufacturer of the main board" and "Model of the main board". (Just two words "manufacturer" and "model" may be written.

How to find out the maternal board model via MSINFO32

It is worth paying attention to the fact that the utility may not show the model of the system board through MSINFO32. It will be written "inaccessible" or similar to the message. Then you have to use another method.

Using the Diagnostic Diagnostics Tool utility

Each system, even in XP there is a DirectX and a built-in diagnostic tool. There is a small amount of information on some basic components. To start the software you need to open the "Run" application and register the following command:

dxdiag 

The application will start, where there are several tabs: "System", "Screen", "Sound", "Enter". We are interested in the first. It must be the following lines:

  • computer manufacturer;
  • Computer model.

Sometimes here is indicated information about the name of the motherboard model.

Learn the name of the system board by using the Diaptx Diagnostics Tool

Method with a command line - SystemInfo

Here we will need a command line. Which opens either through the "Win + X" menu or the "CMD" command. When you open the application, proceed as follows:

  1. Enter the command SystemInfo. .
  2. We are looking for the items "Manufacturer System", "System Model", "System Type".

If you have a laptop, then its full name will be displayed, according to which the system board can already be found on the Internet. If you look for information from a desktop PC, then the full name of the motherboard will be displayed.

Learn the motherboard model using SystemInfo

Definition of the motherboard model using programs

In addition to the built-in Windows tools that help, but not always, determine the name of the computer or laptop system board. There are also third-party software that copes with its task much better.

My favorite program that shows all the characteristics of computer components - Aida64. . From her I will start.

You can download the demo version from the official site. It is enough for you. After starting open the left tab "Motherboard" , then subsection "motherboard" and on the right to see its model / name and other characteristics.

How to determine the motherboard model using AIDA64

Using the CPU-Z program

You can download a free CPU-Z utility from the official site. After it starts, several tabs will be available. Interested in us section "Pay" . Where the "System Board" block will be specified, its manufacturer, model, microcircuit, and other data.

System Board Name with CPU-Z

We learn the name of the motherboard using Speccy

If a professional SPECCY utility is installed on a computer or laptop, then there is also an opportunity to see the model of the motherboard.

After starting the program on the left you need to go to the section "Motherboard" . All the necessary information will appear in the right side of the window.

We learn the name of the motherboard using Speccy

System Support Utility For Windows utility

This tool for computers with equipment for Intel. You can download it from the official site. It weighs it very little and it does not need to be installed.

After startup, the window will open where the program can scan the system and issue the necessary information. Since we are interested only on the motherboard, you can leave a tick opposite item "Motherboard" . Then click SCAN .

System Support Utility For Windows utility

After scanning System Support Utility, I will issue information on Motherboard. The program can be closed.

How to find out which motherboard is standing on a PC and laptop

Search for motherboard model by visual method

The latter in the list method may seem like some difficult. Many, because of their laziness, do not want to open the cover of the system unit. As for the laptop, there are difficulties here, as you have to unscrew a lot of different bolts and disconnect the loops to get to the system board.

In general, all you need to do is see your motherboard with your own eyes and find her name. Usually the name of the model is indicated by a fat and released font.

Search for motherboard model by visual method

Hello everyone! In today's post, I will tell you how to know my motherboard on Windows 7. This information may be needed if you are going to reinstall Windows on your computer, and then download the appropriate drivers on the manufacturer's official website.

How to see the model of the mother

Determine what is the motherboard in the PC, it is possible without special programs. The necessary funds are in the basic toolkit of any modern version of Windows - from "Seven" to the "dozens" inclusive.

Learning what is the motherboard with the help of information about the system

Option using the utility from the basic tool dialing is suitable for Windows 7 and 10. How to run it:

  1. Press the Win + R key combination;
  2. In the search line, enter MSINFO32.

The part name will be indicated in the "Model" string. But it also happens that the indicator as "unknown device" is defined on some machines. Therefore, it is better to use the following method.

How to find out the modification of "mother" through the command line

The algorithm is the following:

  • Press the Start button;
  • In the search string, enter CMD;
  • Launch the found file cmd.exe;
  • In the window that opens, enter WMIC Baseboard Get Product.

Please note that the command line does not support the insert function, so you need to type everything manually. After pressing the Enter button, you will receive system information that the motherboard will be written.

Similarly, you can learn the manufacturer of the part. To do this, enter the WMIC Baseboard Get Manufacturer on the command prompt.

What kind of game "mother" differs from the usual, you can read here.

Use free software

The necessary data can be obtained using utilities from third-party developers. Such programs have been created quite a lot. Consider, in my opinion, the best of them.

Aida64.

Some versions of this utility may be called Everest. The program is paid, but on file sharing, where it can be found, as a rule, in the kit and "medicine for greed".

Despite the fact that the program has long been not supported by the developers and is not updated, it knows how to determine the parameters of all modern components.

The information you need is located in the tab "System Board" on the left part of the menu.

In addition to the model itself, here you can read all performance.

Speccy.

The utility is distributed free of charge. The required data can be viewed in the "General Information" section in the "System Board" tab.

Visual inspection of details

If the computer simply does not turn on, none of the methods described above does not fit. You can find out the model of the motherboard in this case by opening the lid of the system unit and look at the fee.

There may be not exactly the model, but some marking must be present. What does the inscription in "Momka" mean, you can easily be easy to scale with another device connected to the Internet.

As a rule, the marking is applied by large letters on the board just below the processor. In addition, the manufacturer indicates the same information on the part box and in the accompanying documentation.

For you will be useful to publishing the "Best Budget Motherboard 1151" and "The Best Mother Boards for Games 2018". I will be grateful if you share this post on social networks. Till tomorrow!

Sincerely, author of Blog Andrei Andreev.

The motherboard is a multifunctional platform that ensures the performance of each component of the personal computer: RAM, video cards, hard drives, central processing. Therefore, it is also important before the purchase of additional equipment to deal with whether components with Matplatta will be compatible. The only way to deal with the task is to find out the model of the motherboard already installed in the system unit. And, as practice tells, options to check the specified operation more than it seems at first glance ...

How to find out the motherboard model of Windows

With the task to check the equipment, the Windows operating system copes in two bills. Moreover, both in Windows XP, and Windows 8, the order of action is the same - you will have to access the section "System Information", which is available on the MSINFO32 command (the procedure will be described below). There is displayed each part associated with a personal computer - the number of RAM, the current video card, the operating system, the tank capacity. But an alternative way that prompts about the installed motherboard is not provided in Windows (if you do not count the command line) - neither the device manager nor the properties of the computer will prompt about the "main equipment", and light only on additional components.

View in Msinfo32.

The procedure for action is quite predictable:

  • First, you need to call the "Run" command using the Win + R key combination (Win button raises the start and, as a rule, is located on the keyboard between Ctrl and Alt).

How to find out the motherboard model of Windows

With the task to check the equipment, the Windows operating system copes in two bills. Moreover, both in Windows XP, and Windows 8, the order of action is the same - you will have to access the section "System Information", which is available on the MSINFO32 command (the procedure will be described below). There is displayed each part associated with a personal computer - the number of RAM, the current video card, the operating system, the tank capacity. But an alternative way that prompts about the installed motherboard is not provided in Windows (if you do not count the command line) - neither the device manager nor the properties of the computer will prompt about the "main equipment", and light only on additional components.

View in Msinfo32.

The procedure for action is quite predictable:

  • First, you need to call the "Run" command using the Win + R key combination (Win button raises the start and, as a rule, is located on the keyboard between Ctrl and Alt).
How to find out which motherboard on the computer
  • The next step is to enter a combination of letters and numbers MSINFO32. Confirm the execution of the operation will help the ENTER button.
  • After a huge table appears on the screen with additional information, it's time to go to the search, which is located at the bottom of the interface. First, it is worth entering a combination of the "mainboard manufacturer" (manufacturer of Matpal). And secondly, the "model of the main board" for the full name.
How to find out which motherboard on the computer

Alas, Windows to see the name of the motherboard in Windows 10, it turns out not always - in 50 percent of the cases will have to be content with the inscription: "Not available", reflecting the inability to figure out the exact name of Matpal. Repeated search will not help. And, it means, it is time to move to other ways.

Using the Windows command line

How to find out what motherboard costs without using additional software? Of course, using the command line:

  • Access to the search platform opens through the Start menu and the CMD query in the search bar (alternative option - enter the "Command Line" name, and then press ENTER).
How to find out which motherboard on the computer
  • After the operating system is loaded by the command prompt, it will be possible to enter the following message: WMic Baseboard Get Product. In response to the entered combination, a message about the type of motherboard will appear. If you enter the WMIC Baseboard Get Manufacturer message, then the manufacturer's name will appear.

Interact with the command line, it is convenient - there is no unintelligible answers, and the situation where the system is not able to recognize the equipment, minimize.

Programs for recognition

If for some reason, to disclose the secrets of the motherboard built into the Windows operating system, the tools did not work, it means it's time to move to heavy artillery - special programs that are loaded from the network, and then describe in detail about the available equipment and even help download the latest drivers:

  • Speccy is a freely distributed utility developed by the CCleaner studio, and a total telling about the available components, including the Motherboard. Of the advantages of this approach, the lightning collection of technical information without using the command line. And there is also a translation into Russian, searching for contents, instructions for beginners and even a special terminal displaying the temperature of the central processor, video cards and hard drives.
  • AIDA64. If the Speccy was unable to determine the Matthew, then it's time to go to Aida64 - perhaps the most unported tool that can even look into the unexplored corners of a personal computer. The assistant collects information about everything and immediately - the operating system and the available licenses, the temperature, voltage, acceleration, the speed of rotation of the coolers, the DIRECTX version, the speed of the Internet and security settings. Of the additional advantages (those that go beyond the question "How to find out which motherboard on a computer") - the presence of the "Test" section. Here the developers offer special testing at the "maximum speeds", with the sole purpose - to determine how well the computer copes with maximum loads.
  • Driver Booster - Formally, the Iobit Studio tool does not specify the available components and does not output the statistics of the installed video cards, RAM or board. But but suggests, the drivers on which components it's time to update. And at the same time, it helps to upload the necessary drivers and install (and before the start of the procedure, you can even organize the recovery point - just in case). Working with Driver Booster is easy - the translation into Russian is available, the interface is visual, and the interaction with the available functionality occurs in a semi-automatic mode, where it is impossible to click "not there".
How to find out which motherboard on the computer

Visual inspection

How to find out what motherboard is installed on a computer if the PC is not possible due to the missing equipment? The only way to get to the truth is to have a visual inspection. Looking at the labeling, and the inscriptions left by the manufacturer. As a rule, even newcomers are able to cope with the task, have never come across personal computers. The main thing is to strain vision and fantasy, and then will armared by a smartphone or tablet, turn on Google and enter the found combinations of letters and characters. With a probability of 99%, the necessary information will definitely be found.

How to find out the clock generator model

Recognize a clock frequency generator model using Windows pre-installed in the operating system, it is impossible for AIDA64. It is necessary to search for the necessary information - right on the motherboard, open the case. The generator looks like a tiny card with numbers in the title, which are easily decrypted in Google.

How to find out the smoke model

The closer is an alternative name of the clock frequency generator, and therefore the order of action is the same - you will have to disassemble the system unit and carefully visually scatter the MATPLATE for similar items with ICS marking.

How to find out which motherboard on the computer

How to find out "Clock Generator" motherboard?

Only the SetFSB tool is capable of dealing with the task, and therefore it will be necessary to act as follows: * Load the archive with the tool from the official site.

  • Immediately after the trial start, enter the identification number in the upper part of the interface (in the screenshot, for example, the combination 1726030115 is visible in the upper part of the text field.
  • After a kind of license is passed for a kind of license, a new information and reference window will appear, where the enumeration of a variety of information is listed. Including the CLOCK GENERATOR. If the specified window is empty or reinstall, or close the setfsb, and then re-enter the identification number into the empty text box. As practice tells, from the third or fourth fold, the necessary information will definitely appear.

Surprisingly, the value of the SETFSB in the network has not yet appeared. Therefore, to check the Clock Generator will have to follow the instructions described above!

How to find out the manufacturer of motherboard on a laptop

Equipment available in a laptop or netbook, although different from the "standard" dimensions, interact with the Matpatta and additional components here coming also (Of course, not counting the visual inspection - on a laptop or netbook, such things should be carried out last time - too high Risk when parsing the housing damage loops leading to the monitor or keyboard, or violate the current warranty). For example, using AIDA64 or SPECCY, or, as alternative options:

  • CPU-Z - Initially, the tool only told about the processor, but later there was also additional information - for example, the name and name of the motherboard used by the cooler, the current information about the BIOS, the version of graphical interfaces, the speed of RAM. If desired, the developers offer to withdraw especially important data in the TXT file. So, they say, the loss of important parameters will not work even with a strong desire.
  • Hwinfo32 - And one more information and reference service available on Windows XP, 7, Vista, 8 and 10, both in full format and in the portable version that is easy to reset to the external drive for use in any place where required Find out the motherboard model on the computer. Of the advantages - information is going to light up, and even for free. Russian language - included. For beginners that have not yet been impassive in computer aza, prompts are available to be called with the help of a special question mark, which is located opposite each information point. It is worth spending a little more time and the details will open at times more.

How else to find out what motherboard on the computer? Use tips for Windows 10. On using the command line and execute commands.

Other interesting articles can be read on our website. Wi-tech.ru.

Thanks to everyone who read to the end.

Do not forget to put like, subscribe to the canal and share publications with friends.

Did you think how to know your motherboard on Windows 7? It is necessary to troubleshoot problems in the OS, correct operation of software. How to do it? Consider the best ways.

How to know your motherboard

There are two ways to Windows 7:

  1. Built in OS utilities;
  2. Specialized software.

Built-in OS

Click "Start", then: Check the information:

Console

Push: In the console, we write two teams showing the name and model of MP.

Speccy.

Download the application at: https://www.ccener.com/speccy/download . Press the LCM on the downloaded "EXE" file to install on the PC. She is simple, will not cause difficulties even at beginners. Open the utility. Check the information:

Output

We reviewed how to find out our motherboard Windows 7. In some laptops, the considered methods may not give results. Then find out information about MP on the site manufacturer.

Did you like the article? To share with friends:

If you bought a computer in the assembly, then, probably, you do not have the idea, on which motherboard it is assembled. But it was necessary to climb inside the "computer" and change something, or reinstall the driver - and immediately arises the question of how to find out this information. Let's tell 8 ways to find out What motherboard stands on the computer.

Method First: "System Information" Windows

Enter the expression in the "Search in Windows" field Msinfo32. The search will give the best compliance - the classic application "System Information" application. Click on it right-click and run on behalf of the administrator.

How to find out what my motherboard has? Touch 8 waysOr press Win + R and enter:

Runas / user: administrator msinfo32.exe 

How to find out what my motherboard has? Touch 8 ways

Enter the administrator password and opens the System Information window, where you need to pay attention to the fields. "Main Board Manufacturer", "Model of the main board" и"Name of the main board" .

How to find out what my motherboard has? Touch 8 ways
Unfortunately, it happens like that. In this case, use other ways.

The second method: dxdiag

Press WIN + R and in the "Run" window, enter the command:

dxdiag 

The DirectX built-in diagnostic system module will open. Pay attention to the fields "Computer Manufacturer" и"Computer Model" .

How to find out what my motherboard has? Touch 8 ways
The PC in these fields will have a system board model. The laptops have an accurate laptop model.

Method Three: SystemInfo

Press WIN + R and run the command line in the "Run" window:

cmd. 

In the command line window, enter:

SystemInfo. 

Wait for the system download and pay attention to the fields. "System Manufacturer" и "System Model" .

How to find out what my motherboard has? Touch 8 ways
The PC in these fields will have a manufacturer and model of the motherboard, laptops - the full name of the laptop model.

Four Method: WMIC

Press Win + R and run the command line in the Previous method as in the previous method. Enter the following text in the command prompt window:

WMic Baseboard Get Product, Manufacturer, Version, SerialNumber 
How to find out what my motherboard has? Touch 8 ways
This method allows us to find out accurate information about the motherboard and on the PC, and on the laptop.

This will start the WMIC utility embedded in Windows and will make it output data that you will see what your motherboard is.

Fifth method: Speccy

Excellent utility from CCleaner creators - Piriform Speccy. . By installing it, you can find out all the information about the components of your computer or laptop, as well as their current state - for example, allows you to check the temperature of the processor. In particular, the program knows how Determine which PC motherboard:

How to find out what my motherboard has? Touch 8 waysIn section Motherboard You can get all the information about the motherboard- for example, about the chipset, BIOS, PCI-Express slots and other parts necessary by a specialist. How to find out what my motherboard has? Touch 8 ways

Sixth Method: CPU-Z

The free CPU-Z utility is very popular to obtain a processor data - such as frequency, temperature, and so on. But it supports data collection and other components, such as the motherboard on the tab Mainboard. .

How to find out what my motherboard has? Touch 8 ways

With the help of the program, you can not only find out what your motherboard has, but also check availability of updates of the chipset drivers online.

Download CPU-Z

Seventh: System Spec

Another old one, but still useful and free information utility - System SPEC. . It also allows you to find out all computer components, including immediately see what motherboard on the computer, in field Motherboard .How to find out what my motherboard has? Touch 8 ways

The utility requires run on behalf of the administrator, otherwise not all data will be available. However, she will show the motherboard and so.

Download System SPEC.

Eighth: Hwinfo32 Portable

This utility is notable for, unlike everyone else, it does not need to be installed. Just download the archive with the utility to the computer and run the desired file - for a 32-bit or 64-bit platform.

Information about the motherboard is available in the object tree in the section Motherboard .

How to find out what my motherboard has? Touch 8 ways

Download hwinfo32 portable

These are affordable and completely free ways to find out which motherboard is installed in the computer - as well as start it is better to understand and understand your "iron". In addition to embedded in Windows methods, Chip recommends a utility Speccy. - It seemed to us the most accurate and detailed in the analysis of components of a particular PC.

See also:

Photo: Author, Maxpixel

Hello! We continue the cycle of notes about the characteristics of your computer - today we will look at how to find out the motherboard model on the computer. Upgrading the drivers, checking the compatibility of iron and purely of curiosity - ... Use the methods of checking the model of the motherboard are much easier to use the method of checking the motherboard model than to disassemble the computer and study stickers inside the systemaker.

How to find out the motherboard model

You can simulate quite a few situations in which the model of the motherboard is very important: a banal driver update, buying a new "iron" (find out what you can add to the system and is there for this necessary slots, for example, to expand the RAM) ...

If you have preserved documents that are issued with a computer (or individual positions on components, if you pick up the components yourself) you can find out the answers to your question exactly there. Probably it is even the best way, because you can check the correspondence of the real situation with what is indicated in your docks.

How to find out the motherboard model? - Little administration

I will not fundamentally tell me how to find out the name of the motherboard by the way of opening the system unit - in the modern situation it is absolutely no need, because software methods will give information more than just visual inspection of the motherboard.

Of course I do not deny that you can find out the model wearing at the board itself (I'm not so frowning to say that this can not be done in any case) and an advanced user probably knows where and what to see ... Well, we recommend using the most simple and right methods

Method 1. Learning the name of the motherboard through the command line

If you are happy to use the Windows command line, you can easily find out the motherboard model using a powerful WMIC Microsoft tool.

With WMIC, we can execute a Baseboard request to check the motherboard and several additional parameters such as serial number, revision and other detailed information about your motherboard. Let's try to find out the manufacturer of our motherboard, model and serial with WMIC.

Open the command prompt (this can be done with the Win + R keys on the key and entering the CMD command). By the way, the command line is not necessarily run on behalf of the administrator. Enter the following text on the command prompt.

WMic Baseboard Get Product, Manufacturer, Version, SerialNumber 

After a couple of seconds, you will receive information about the name of your motherboard ...

How to find out the motherboard model through the command line

What does the information tell us above? - ASUS manufacturer, model board P8H67 ... Unfortunately there are situations when the serial number cannot be determined (I came across MSI cards) But nevertheless, we learned the basic information about the motherboard without opening the corps and did not seek help from third-party software. (Now it is enough just to google ASUS P8H67 and find out on the official website what kind of beast lives in the box under the table)

Method 2 I define the motherboard on the computer SYSTEM SPEC

If you do not like the command line and you are used to everything to do with the mouse and in a clear graphical interface, I recommend a very small System Spec program that does not require installation. You can always be the current version from the developer's official website:

http://www.alxnolan.net/software/sysspec.zip.

The program is in English, but for us it will not be a problem, specifically we are interested in the row of Motherboard - this is the name of our motherboard.

Defining motherboard via System SPEC

Despite such a small size (less than 1 megabyte in the archive) The program can tell a lot about your computer, but I would not recommend it to use it ... Find out what kind of motherboard on the computer - it is great, for all the rest there are more convenient analogues.

Method for 3. AIDA64 - learn the model of the motherboard

There are several AIDA64 editions, the Extreme Edition is perfect for us (the application is worth the money, but we will fit the 30 day trial version designated on the download page as Trial )

https://www.aida64.com/downloads.

After installing AIDA64, run the program and on the left side locate the "System Board" icon. In the window that opens in the second line "System fee" will display the manufacturer and model of the motherboard. As you can see in my computer, the name of the motherboard is ASUS P8H67.

How to see the name of the motherboard in Aida64

If you scroll down the window down, you can find a link to the Fresh BIOS download page (BIOS Update Loading String). This can be useful if the purpose of determining the motherboard firmware of the new version of the BIOS firmware

Method 4. Piriform Speccy - a good program from CCleaner developers

If you have ever used the CCleaner program and she left you only positive emotions with your result, then the question of how to find out the motherboard model you will answer a small Speccy program from the developers of the same CClener (Piriform). You can download as always on the official website:

https://www.piriform.com/speccy/download/standard

Run the application and on the left side, go to the "System Board" tab. On the right side in the "Model" line and there will be an answer to our question - in our case it is P8H67 (LGA1155) ...

How to find out the model of motherboard through Piriform Speccy

Not only that the program correctly determined the name of the motherboard installed in the computer, but also showed its socket (1155) and a lot of useful information (such as voltage, BIOS version and system temperature)

Method 5. CPU-Z - will tell not only about the processor

CPU-Z is a very popular utility to identify the processor, but is perfect for determining the motherboard model on the computer. The program is absolutely free and does not require installation, just download the relevant version from the official website.

http://www.cpuid.com/softwares/cpu-z.html.

After starting the utility, go to the "Mainboard" tab and in the MODEL line will be the name of the installed motherboard. I have a P8H67 motherboard on my computer (for now Indications All applications coincide)

How to know your motherboard via CPU-Z

For many, the BIOS block will be useful, the firmware manufacturer is displayed here ...

Method 6. Hwinfo32 - detailed information about the motherboard

To download the program, go to the official website (there are several versions of the program - hwinfo32 for 32 bit systems and HWINFO for 64 bit). In my case, I downloaded hwinfo64.

https://www.hwinfo.com/download.php.

After installing the corresponding HWINFO version, run it (the start can take a long time collecting information about your computer components). The program automatically displays the System Summary screen, where the motherboard model will be shown in the Motherboard section

How to find out the motherboard model on Windows 10 - Hwinfo64

By the way, note that Hwinfo correctly determined the video card ... it would be necessary to add it to a note about video cards

Method 7. Sisoftware Sandra - undervalued program

When I was looking for information about how to see the motherboard on the computer, I never met such an app in reviews as Sandra Lite (it is we will use it, since it is specifically Lite. - distributed free of charge). As usual, you can download on the official website, avoid left sources ...

http://www.sisoftware.net/

After installing Sisoftware Sandra Lite, run the program and go to the "Devices" tab. In the window that appears, double-click the Motherboard icon and wait until the utility will collect all the necessary information. In a new window, detailed information about your system board will open, in the model "model" and will answer the question how to find out the motherboard model?

How to find out your motherboard on a laptop - Sandra Lite

This section displays not only the name of your motherboard, here you will find quite a lot of other useful information about your motherboard. For example, you can find out how much memory and how many slots under it ... or the chipset model on which your system is built

Bonus! Motherboard information in HTML report

While I was looking for for you the best way to figure out the model of the motherboard on the computer found in the comments from a bourgeois blog link to a program that can generate an HTML file with detailed information about your system. I really liked this approach to the situation and I decided to share it with you.

This application is called lookinmypc and you can download it from the developers site (in English, there is a portable version that does not require installation)

http://www.lookinmypc.com/downLoad.htm.

After starting, you can choose what exactly to generate the report, but we leave everything as it is and click the "Generate Report" button ... It will only be waiting for when a report will be formed - it's fast.

Lookinmypc - position list for report

The report file will open in any browser, in the BIOS information block in the BOARD PRODUCT ID and the name of our motherboard.

LookinmYPC report report

In fact, a lot of interesting and useful information in the report, and as for English - Google Chrome is wonderful everything translates.

The report generates quite a lot of data on the program part, and you can view it at any time without the program itself - it is very convenient

What did we know about the motherboard? - Findings

Friends, we reviewed several ways to find out the motherboard model. As you understood from the notes, it is quite realistic to do not disassemble the system unit - exist more Civilized Methods.

What to do with this information? - Even if you need to visually look at your motherboard, it is quite possible to find its image and specification on the official website by the name of the model.

P.S. I hope you now know the name of your motherboard and upgrade problems or updating drivers should not. You can still write about the definition of the motherboard for a long time, for sure there is still more than a dozen programs and ways for this purpose ... But for us there is enough and put in the note. If you want to share your lifehakami - write in the comments.

Motherboard in Windows 7

In some cases, users should find out the model and developer of the motherboard. This may be necessary in order to find out its technical characteristics and compare with the characteristics of analogs. The name of the motherboard model still needs to be known to find suitable drivers to it. Let's find out how to determine the name of the motherboard brand on a computer running Windows 7.

Ways to determine the name

The most obvious option to determine the system board model is to see the name on its package. But for this you will have to disassemble the PC. We will find out how this can be done using only software, without opening the PC housing. As in most other cases, this task can be solved by two groups of methods: using third-party software and applying only the built-in operating system toolkit.

Method 1: Aida64

One of the most popular programs with which you can define the basic parameters of the computer and the system, is AIDA64. Taking advantage of it, you can also determine the brand of the motherboard.

  1. Run AIDA64. In the left area of ​​the application interface click by name "Motherboard" .
  2. Go to section System board in the AIDA64 program in Windows 7

  3. The list of components opens. In it, too, click on the name "Motherboard" . After that in the central part of the window in the group "Properties of motherboard" The desired information will be presented. Opposite item "Motherboard" The model and name of the manufacturer of the motherboard will be indicated. Opposite the parameter "ID of motherboard" Located its serial number.

Model and manufacturer of motherboard in the AIDA64 program in Windows 7

The disadvantage of this method is that the free use of AIDA64 is limited to only one month.

Method 2: CPU-Z

The next third-party program with which you can find out the information you are interested in is a small CPU-Z utility.

  1. Run CPU-Z. Already during the launch, this program analyzes your system. Once the application window opens, move to the tab "Mainboard" .
  2. Go to the Mainboard tab in the CPU-Z program in Windows 7

  3. In the new tab in the field "MANUFACTURER" The name of the motherboard manufacturer appears, and in the field "Model" - Models.

Model and manufacturer of motherboard in the CPU-Z program in Windows 7

In contrast to the previous version of the problem, the application of CPU-Z is absolutely free, but the application interface is made in English, which may seem like uncomfortable domestic users.

Method 3: Speccy

Another application that can provide information you are interested in is Speccy.

  1. Activate Speccy. After opening the program window, the PC analysis automatically starts.
  2. Analysis in the Speccy program in Windows 7

  3. After completion of the analysis, all the information you need will be displayed in the main application window. The name of the model of the motherboard and the name of its developer will be displayed in the section "Motherboard" .
  4. Model and manufacturer of motherboard in the Speccy program in Windows 7

  5. In order to get more accurate maternal data, click on the name "Motherboard" .
  6. Go to the System Board section in the Speccy program in Windows 7

  7. More detailed information about the motherboard opens. There is already the name of the manufacturer and the model are made in separate lines.

System board section in the Speccy program in Windows 7

This method combines the positive moments of the two previous options: the free and Russian-speaking interface.

Method 4: "System Information"

You can also learn the search for information with the help of "Native" tools Windows 7. First of all, find out how to take it using the section "System Information" .

  1. To go B. "System Information" Click "Start" . Next choose "All programs" .
  2. Go to all programs through the Start menu in Windows 7

  3. Then go to the folder "Standard" .
  4. Go to the Standard Program folder via Start menu in Windows 7

  5. Next click on the catalog "Service" .
  6. Go to the service program folder through the Start menu in Windows 7

  7. The list of utilities opens. Choose in it "System Information" .

    Go to the system information window through the Start menu in Windows 7

    Also in the desired window you can get in another way, but for this you need to remember the key combination and the command. Dial Win + R. . In field "Run" Enter:

    MSInfo32.

    Click ENTER or Ok .

  8. Go to the System Information Window by entering the Command in Windows 7

  9. Whether you will act through the button "Start" or with tool "Run" , window will start "System Information" . In it in the same name we are looking for a parameter "Manufacturer" . It is exactly the value that will correspond to him and indicates the manufacturer of this component. Opposite the parameter "Model" It is indicated the name of the model of the motherboard.

Model and manufacturer of motherboard in the System Information window in Windows 7

Method 5: "Command String"

Find out the name of the developer and the model of the component you are interested in and by entering the expression in "Command Line" . Moreover, you can perform it by applying several command options.

  1. To activate "Command Line" , Press "Start" и "All programs" .
  2. Go to all programs through the Start menu in Windows 7

  3. After that, select the folder "Standard" .
  4. Switch to the folder of standard programs through the Start menu in Windows 7

  5. In the tab that opens, select the name "Command line" . Click on it right mouse button ( PKM. ). Select in the menu "Run on the name of the administrator" .
  6. Run a command line on behalf of the administrator via the Start menu in Windows 7

  7. An interface is activated "Command Line" . To get system information, enter the following command:

    SystemInfo.

    Click ENTER .

  8. Enter SystemInfo command in the command line window in Windows 7

  9. The collection of information about the system begins.
  10. Getting information about the system in the command line window in Windows 7

  11. After the completion of the procedure right in "Command Line" The report on the main parameters of the computer will appear. We will be interested in strings "System Manufacturer" и "System Model" . It is in them that the developer's name and model of the motherboard will be displayed.

Model and motherboard manufacturer in the command line window in Windows 7

There is another option to display the information you need through the interface. "Command Line" . It is even more relevant due to the fact that on some computers, previous methods may not work. Of course, such devices are far from most, but, nevertheless, on the PC part only the following option will determine the question that cares us with the help of embedded OS tools.

  1. To clarify the name of the developer of the motherboard, activate "Command Line" And take the expression:

    WMic Baseboard Get Manufacturer

    Press ENTER .

  2. Enter WMic Baseboard Get Manufacturer in the command-line window to determine the motherboard manufacturer in Windows 7

  3. В "Command Line" The name of the developer will appear.
  4. Name of the manufacturer of the motherboard in the command line window in Windows 7

  5. To clarify the model, enter the expression:

    WMic Baseboard Get Product

    Press again ENTER .

  6. Enter the WMIC Baseboard Get Product command in the command line window to determine the motherboard model in Windows 7

  7. The name of the model will appear in the window "Command Line" .

Name of the motherboard model in the command line window in Windows 7

But you can not enter separately these commands, but insert in "Command Line" Immediately one expression that will allow you to determine not only the brand and model of the device, but also its serial number.

  1. This team will look like this:

    WMic Baseboard Get Manufacturer, Product, SerialNumber

    Press ENTER .

  2. Enter WMic Baseboard Get Manufacturer, Product, SerialNumber in the command line window to determine the motherboard, model and serial number in Windows 7

  3. В "Command Line" Under the parameter "MANUFACTURER" The name of the manufacturer is displayed, under the parameter "Product" - model component, and under the parameter "SERIALNUMBER" - His serial number.

The name of the model, manufacturer and serial number of the motherboard in the command line window in Windows 7

In addition, from "Command Line" You can call the window familiar to us "System Information" and see the necessary information there.

  1. Enter B. "Command Line" :

    MSInfo32.

    Click ENTER .

  2. Enter MSINFO32 command in the command line window in Windows 7

  3. Window starts "System Information" . Where to look for the necessary information in this window, it was already described in detail above.

System Information Window in Windows 7

Lesson: Enable "Command Line" in Windows 7

Method 6: BIOS

Information about the motherboard is displayed when the computer is turned on, that is, when it is in the so-called POST BIOS state. At this time, the download screen is displayed, but the operating system itself still does not start. Considering that the download screen is involved quite short time, after which the OS activation begins, you need to have time to find the necessary information. If you want to fix the status of POST BIOS to quietly find the maternal data, then click Pause .

In addition, information about the brand and model of the motherboard can learn by going to the BIOS itself. To do this, click F2. or F10 When loading the system, although there are other combinations. True, it should be noted that you do not find this data in all versions of the BIOS. It is possible to find them mainly in modern versions of UEFI, and in the old versions they are often absent.

In Windows 7, there are quite a few options to view the name of the manufacturer and motherboard model. You can perform both with third-party diagnostic programs and applying exclusively tools of the operating system, in particular "Command Line" or section "System Information" . In addition, this data can be viewed in the BIOS or POST BIOS of the computer. There is always the opportunity to find out the data and by visual inspection of the motherboard itself, dismissed the PC housing.

CloseWe are glad that you could help you solve the problem. CloseDescribe what you did not work.

Our specialists will try to answer as quickly as possible.

Will this article help you?

WELL NO


Добавить комментарий